OPTIMASI PARAMETER PEMESINAN ULIR MATERIAL TITANIUM TI-6AL-4V ELI TERHADAP JARAK PITCH DAN SUDUT ULIR MENGGUNAKAN METODE TAGUCHI

Cici Septiani, 1715021006 (2022) OPTIMASI PARAMETER PEMESINAN ULIR MATERIAL TITANIUM TI-6AL-4V ELI TERHADAP JARAK PITCH DAN SUDUT ULIR MENGGUNAKAN METODE TAGUCHI. TEKNIK, UNIVERSITAS LAMPUNG.

	File PDF ABSTRAK (ABSTRACT).pdf Restricted to Hanya pengguna terdaftar Download (13Kb)
	File PDF SKRIPSI FULL.pdf Restricted to Hanya staf Download (1812Kb)
	File PDF SKRIPSI TANPA BAB PEMBAHSAN.pdf Restricted to Hanya pengguna terdaftar Download (1571Kb)

Abstrak (Berisi Bastraknya saja, Judul dan Nama Tidak Boleh di Masukan)

ABSTARCT OPTIMIZATION OF TITANIUM TI-6AL-4V ELI MATERIAL THREAD MACHINERY PARAMETERS ON PITCH DISTANCE AND THREAD ANGLE USING TAGUCHI METHOD By CICI SEPTIANI Titanium alloy is a lightweight material that is widely used because it is lightweight and resistant to corrosion. This shows that the manufacture of threads on titanium is very supportive to be applied in the biomedical field. The precision of the screw geometry will have an influence on the quality of the thread, especially when the thread is working when it is used as a bone connector. Titanium thread geometry error in screw lathe machining is influenced by cutting speed, depth of cut, and type of machining. This study examines the response of the pitch error, and the thread angle error on the M4x0.7 thread diameter with 3 levels and 3 factors and then processing the data using the Taguchi optimization process with variations in cutting speed of 17.58, 21.35, 25.12 m/min, depth of cut 0.085, 0.108 , and 0.143 mm, and lathe machining used is dry machining, using palm oil lubricant and using synthetic oil lubricant. Optimal results are obtained in a combination of cutting conditions with a cutting speed factor of 25.12 m/min and a cutting depth of 0.108 mm and palm oil where the response to pitch error is 0.170 mm and optimal cutting conditions at the screw angle error are the cutting speed parameter 17.58 m/min, depth of cut is 0.085. mm and dry machining type where the response angle error is 0.260° Keywords : Precision Of Thread Geometry,Taguchi Method, Titanium,

Jenis Karya Akhir:	Skripsi
Subyek:	600 Teknologi (ilmu terapan) 600 Teknologi (ilmu terapan) > 620 Ilmu teknik dan ilmu yang berkaitan
Program Studi:	Fakultas Teknik > Prodi S1-Teknik Mesin
Pengguna Deposit:	2208636071 . Digilib
Date Deposited:	24 Aug 2022 07:32
Terakhir diubah:	24 Aug 2022 07:32
URI:	http://digilib.unila.ac.id/id/eprint/65548

Actions (login required)

Lihat Karya Akhir