TY - GEN CY - UNIVERSITAS LAMPUNG ID - eprints20869 UR - http://digilib.unila.ac.id/20869/ A1 - Muhammad Zaini, 1114071034 Y1 - 2015/10/26/ N2 - Peralatan elektronik di Indonesia umumnya digunakan dalam bentuk arus AC (alternating curent), sedangkan energi yang dikeluarkan oleh panel surya memiliki arus searah atau DC (direct current). Untuk itu, jika ingin menggunakan alat elektronik tersebut harus merubahnya ke dalam arus AC dengan menggunakan inverter. Penambahan inverter dapat meningkatkan daya yang dibutuhkan oleh beban AC dikarenakan daya yang digunakan sebagian untuk menghidupkan inverter. Penelitian ini bertujuan untuk mengetahui pengaruh jenis beban (AC atau DC) terhadap kinerja panel surya. Pengujian panel surya teridiri dari 3 modul dengan besaran daya dan jenis beban yang berbeda, yaitu DC 5W, 15W, dan 65W serta AC 15W, 18W, dan 25W. Parameter yang diamati meliputi voltase dan arus yang dihasilkan dari panel surya, inverter, dan baterai. Besarnya energi radiasi matahari pada hari pengamatan diperoleh dari stasiun klimatologi Politeknik Negeri Lampung. Hasil pengujian didapatkan bahwa energi yang dikeluarkan oleh baterai ke beban AC 15W, 18W, dan 25W berturut-turut adalah 4,10 MJ, 2,8 MJ dan 3,71 MJ; sedangkan energi yang dibutuhkan beban berturut-turut adalah 2,04 MJ (49,4%), 2,39 MJ (96,8%), dan 1,78 MJ (48,1%). Energi yang yang dikeluarkan oleh baterai dan digunakan untuk mengoperasikan inverter berturut-turut adalah 50,6%, 3,2% dan 51,9%. Energi yang digunakan beban DC 5W, 15W, dan 65W adalah 0,64 MJ (8,07%), 3,08 MJ (55,9%), dan 2,12 MJ (49,5%). Dapat disimpulkan bahwa penggunaan beban DC lebih efisien dibandingkan beban AC. Kata kunci: panel surya, inverter, beban AC, beban DC. THE COMPARISON PERFORMANCE SYSTEM OF SOLAR ENERGY WITH AC (Alternating Current) LOAD AND DC (Direct Current) LOAD. Electronic equipment in Indonesia are generally used in the form of AC (alternating curent), while the energy released by the solar panels have a Direct Current or DC. Therefore, if you want to use the electronic devices must change into alternating current by using an inverter. Addition of inverter can increase the power needed by the AC load, because of the power used in part to turn the inverter. The objective of this research was to compare the performance of solar panel under AC and DC load utilization. Experiments was conducted by testing a solar panel consisted three moduls under different load types and sizes, namely DC 5W, 15W, and 65W as well as AC 15W, 18W, and 25W. Analysis was performed on the important parameters, including solar insolation, voltage, and electric current. Data for solar insolation at the observation days were collected from Climatology Station of Politeknik Negeri Lampung. The results showed that the energy expended by the battery to the AC load 15W, 18W, and 25W respectively MJ 4.10, 2.8 and 3.71 MJ; energy required by loads was 2,04 MJ (49,4%), 2,39 MJ (96,8%), and 1,78 MJ (48,1%). The energy released from battery and used to operate the inverter was 50,6%, 3,2% dan 51,9%, respectively. Energy used DC load 5W, 15W, and 65W is 0.64 MJ (8.07%), 3.08 MJ (55.9%), and 2.12 MJ (49.5%). It was concluded that solar panel system was more efficient using DC loads as compared to AC loads. Keywords: Solar panel, inverter, AC load, DC load. PB - FAKULTAS PERTANIAN TI - PERBANDINGAN KINERJA SISTEM PEMBANGKIT LISTRIK TENAGA SURYA DENGAN BEBAN AC (Alternating Current) DAN BEBAN DC (Direct Current) AV - restricted ER -