%0 Generic
%A Suhardi,  1115011100
%C UNIVERSITAS LAMPUNG
%D 2016
%F eprints:21106
%I FAKULTAS TEKNIK
%T    STUDI KARAKTERISTIK MARSHALL PADA CAMPURAN ASPAL  DENGAN PENAMBAHAN LIMBAH BOTOL PLASTIK     
%U http://digilib.unila.ac.id/21106/
%X ABSTRAK     Penelitian ini bertujuan untuk mengetahui karakteristik marshall akibat  penambahan Variasi PET (Polyethylene Terephthalate) pada campuran AC-BC  (Asphalt Concrete-Binder Course) bergradasi halus dengan mengacu pada  spesifikasi Bina Marga 2010. Penelitian ini dilakukan dengan membedakan  gradasi benda uji dan persentase penambahan PET (Polyethylene Terephthalate).  Kelompok benda uji I diwakili oleh gradasi batas tengah dan kelompok benda uji  II diwakili oleh batas atas. Kelompok benda uji penambahan PET  (Polyethylene  Terephthalate) diwakili masing-masing yaitu gradasi batas tengah dan gradasi  batas atas.      Dari hasil analisis diperoleh nilai nilai parameter-parameter Marshal, nilai  kelompok benda uji I dan benda uji II untuk parameter marshall memenuhi  spesifikasi yang disyaratkan Bina Marga 2010 pada rentang kadar aspal 6,38 %  sampai dengan 6,5%, dan nilai KAO yang didapatkan sebesar 6,44 %.  Penambahan PET (Polyethylene Terephthalate) pada campuran AC-BC dilakukan  pada kadar 0%, 1,5%, 2,5%, 3,5%, 4,5%, 5,5%, dan 6,5%. pada penelitian ini  mengalami perubahan pada parameter-parameter Marshall. Perubahan yang  memenuhi standar Bina Marga 2010 yaitu dari segi kekuatan stabilitas, nilai Flow  dan Marshall Quotient. Sedangkan yang tidak memenuhi standar Bina Marga  2010 yaitu nilai kepadatan rongga (VIM), rongga terisi agregat (VMA) dan  rongga terisi aspal (VFA).      Penelitian ini membuktikan bahwa dengan adanya penambahan variasi  PET (Polyethylene Terephthalate) pada  campuran AC-BC (Asphalt ConcreteBinder    Course) berpengaruh terhadap karakteristik Marshall, semakin tinggi  kadar penambahan PET (Polyethylene Terephthalate) maka nilai stabilitas akan  meningkat tetapi untuk nilai kadar rongga dalam campuran semakin tinggi  persentasenya.    Kata Kunci : AC-BC (Asphalt Concrete-Binder Course), Marshall, PET   (Polyethylene Terephthalate)   ABSTRACT    This experiment aims to investigate the Marshall characteristics due to the   variation addition of PET (Polyethylene Terephthalate) at mixtures AC-BC  (Asphalt Concrete-Binder Course) finely graded with reference to the  specification of Bina Marga 2010. This research was conducted by differentiating  gradations of the test specimen and the percentage addition of PET (Polyethylene  Terephthalate). The 1  st   group test object group was represented by middle limit  gradation and The 2  nd   group test object was represented by the upper limit.   Group specimen addition of PET (Polyethylene Terephthalate) are represented  respectively gradation middle limit and upper limit gradation.     From the result of aalysis has obtained the values of Marshall parameters,   the value of the 1  st   object groups test and 2nd object groups test, for the  parameters marshall  meets the specifications already determined by the Bina  Marga 2010 on the asphalt level range 6.38% up 6.5%, and the optimum bitumen  content value has been obtained is 6.44%. The addition of PET ( Polyethylene  Terephthalate ) in a mixture of AC - BC performed at levels of 0 % , 1.5% , 2.5% ,  3.5% , 4.5% , 5.5 % and 6.5 % . in this study experienced a change in parameters  Marshall. The Changes that meet the standards of Bina Marga 2010 are in terms  of strength stability, flow and Marshall Quotient values. While those does not  meet the standards of Bina Marga 2010 are density values (VIM) cavity , the  cavity filled with aggregate (VMA) and the cavity filled with asphalt (VFA)    .  This research proves that with the addition of variations of PET   (Polyethylene Terephthalate) in a mixture of AC-BC (Asphalt Concrete-Binder  Course) was affected to the Marshall characteristics, as high as the levels of  addition PET (Polyethylene Terephthalate) so the value of stability will increase  but the percentage of the value of void content in the mix will be higher.       Keywords : AC-BC (Asphalt Concrete-Binder Course), Marshall, PET   (Polyethylene Terephthalate)