Digital Library: No conditions. Results ordered -Date Deposited. 2024-03-28T22:48:11ZEPrintshttp://digilib.unila.ac.id/images/sitelogo.pnghttp://digilib.unila.ac.id/2014-10-02T03:45:40Z2014-10-02T03:45:40Zhttp://digilib.unila.ac.id/id/eprint/3744This item is in the repository with the URL: http://digilib.unila.ac.id/id/eprint/37442014-10-02T03:45:40ZPROTOTYPE AUTOMATION SYSTEM RAISING THE VOLTAGE RISE
TO REACH A VALUE OF BREAKDOWN VOLTAGE ON ELECTRICAL
INSULATION
PROTOTIPE SISTEM OTOMASI PENAIKAN TEGANGAN SECARA
BERTINGKAT UNTUK MENCAPAI NILAI TEGANGAN TEMBUS PADA
ISOLASI LISTRIKInsulation of electrical equipment is essential for the protection of electrical
equipment and we as engineers or consumers of electric shock is quite dangerous
for our salvation. Insulation resistance testing (Insulation Resistance Test) was
conducted to determine the condition of the insulation of electrical equipment for
safe operation next tool.
As for damage to the insulation of electrical equipment and cause a lot of damage
indication that we can see physically. Some indication of the cause of damage to
the insulation of electrical equipment, among others, are, swelling, cracking,
splitting, discoloration indicative of aging by heat (thermal), the incidence of
contamination on the surface of the coil and the connection surface, the
occurrence of abrasion or other mechanical pressure caused, evidence of the
occurrence of partial discharge (partial discharge) and corona.
This research is centered on the manufacture of electrical insulation testing
prototype tool with the increase of the voltage rise. With a voltage range between
0 range with 1 kV. By using air as the insulating medium to be measured, which
then set the width of the gap distance between the electrode voltage conductors.
Keywords: insulation, partial discharge, instulation Resistance test, gap spacing,
electrode, corona, thermal.
Isolasi peralatan listrik sangat penting untuk perlindungan peralatan listrik
maupun kita sebagai engineer ataupun konsumen dari sengatan listrik yang cukup
membahayakan bagi keselamatan kita. Pengujian tahanan isolasi (Insulation
Resistance Test) dilakukan untuk mengetahui kondisi isolasi suatu peralatan listrik
untuk keamanan pengoperasian alat selanjutnya.
Adapun terjadinya kerusakan isolasi peralatan listrik banyak sekali penyebab dan
indikasi kerusakan yang dapat kita lihat secara fisik. Beberapa indikasi yang
menyebabkan terjadinya kerusakan isolasi peralatan listrik antara lain ialah,
pembengkakan, retak, pemisahan, perubahan warna sebagai indikasi penuaan
akibat panas (termal), timbulnya kontaminasi pada permukaan kumparan dan
permukaan koneksi, terjadinya abrasi atau hal yang di sebabkan tekanan mekanis
lainnya, bukti terjadinya luahan parsial (partial discharge) dan korona.
Penelitian ini berpusat pada pembuatan alat prototipe pengujian isolasi listrik
dengan penaikan tegangan secara bertingkat. Dengan range tegangan kisaran
antara 0 sampai dengan 1 kV. Dengan menggunakan media udara sebagai isolasi
yang akan di ukur, yang kemudian di atur lebar jarak gap antara elektroda
penghantar tegangan.0815031057 Firman Zamizi