Digital Library: No conditions. Results ordered -Date Deposited. 2024-03-28T23:25:44ZEPrintshttp://digilib.unila.ac.id/images/sitelogo.pnghttp://digilib.unila.ac.id/2016-04-25T06:17:54Z2016-04-25T06:17:54Zhttp://digilib.unila.ac.id/id/eprint/21878This item is in the repository with the URL: http://digilib.unila.ac.id/id/eprint/218782016-04-25T06:17:54ZPENGARUH FRAKSI VOLUME TERHADAP KEKUATAN TARIK
KOMPOSIT BERPENGUAT SERAT KULIT BATANG WARU
(HIBISCUS TILIACEUS) – RESIN EPOXY
(Skripsi)
ABSTRAK
ii
Perkembangan ilmu material pada hakikatnya terus berkembang seiring dengan
memanfaatkan pengolahan bahan dan teknologi. Salah satu aspek yang perlu
dipertimbangkan dalam mendapatkan material baru adalah pemanfaatan bahan
yang berasal dari tumbuhan atau organik. Salah satu material yang dapat terbuat
dari bahan organik adalah komposit.
Pohon waru tumbuh dan tersebar hampir di seluruh provinsi di Indonesia namun
pemanfaatan kulit batang waru sebatas untuk tali atau pengikat. Sedangkan serat
kulit batang waru memiliki potensi untuk dimanfaatkan menjadi bahan penguat
komposit. Penelitian ini bertujuan untuk mengetahui hubungan antara fraksi
volume serat terhadap kekuatan tegangan tarik. Dalam penelitian ini serat kulit
batang waru dilakukan perlakuan alkali 5% selama waktu 2 jam. Sedangkan resin
yang digunakan adalah epoxy, dengan variasi fraksi volume serat 5%, 10%, dan
15%.
Pengujian komposit ini, menggunakan pengujian tarik dengan ASTM D-638. Dari
hasil pengujian tarik tersebut diperoleh nilai kekuatan tarik terendah pada fraksi
volume 5% yaitu dengan nilai 11,063 MPa. Hasil uji tarik tertinggi pada fraksi
volume 15% dengan nilai sebesar 15.973 MPa. Dan untuk fraksi volume 10%
diperoleh nilai 12.997 MPa. Hasil pengujian tarik tersebut menunjukkan
hubungan antara fraksi volume dengan uji tarik, semakin tinggi fraksi volume
maka semakin tinggi tegangan tarik yang diberikan. Berdasarkan hasil Scanning
Electron Microscope menunjukkan fiber pull-out dan void adalah penyebab utama
kegagalan komposit.
Kata kunci : Komposit, serat kulit waru, resin epoxy, fraksi volume, kekuatan
tarik, Scanning Electron Microscope (SEM).
ABSTRACT
The development of materials science is essentially continues to grow along with
utilizing the materials and processing technology. One aspect to consider in
getting the new material is the use of materials derived from plants or organic.
One material that can be made from organic materials that is composite.
Hibiscus tree grew and spread to almost all provinces in Indonesia, but the
utilization of limited hibiscus bark for rope or fastener. While the hibiscus leather
fiber has the potential to be utilized as a reinforcing material composite. This
research is to determine the relationship between fiber volume fraction on tensile
strength. In this study hibiscus bark fibers made alkali treatment 5% for 2 hours.
While the epoxy resin used is the variation of fiber volume fraction of 5%, 10%
and 15%.
This composite testing, using a tensile testing with ASTM D-638. From the results
of the tensile test tensile strength values obtained at the lowest possible volume
fraction of 5% which is the value of 11.063 MPa. The highest tensile test results
on a volume fraction of 15% with a value of 15.973 MPa. And for the volume
fraction of 10% obtained by the value of 12.997 MPa. The tensile test results
show the relationship between the volume fraction of the tensile test, the higher
the volume fraction, the higher the tensile stress given. Based on the results of
scanning electron microscope shows fiber pull-out and the void are the main
causes of failure of composites.
Keywords: Composite, hibiscus leather fiber, epoxy resin, the volume fraction,
tensile strength, Scanning Electron Microscope (SEM).
i
(1015021052) R.DIAN WIDIATMOKOdianrobertus@gmail.com