Digital Library: No conditions. Results ordered -Date Deposited. 2024-03-29T14:47:59ZEPrintshttp://digilib.unila.ac.id/images/sitelogo.pnghttp://digilib.unila.ac.id/2015-07-14T04:14:44Z2015-11-03T07:58:53Zhttp://digilib.unila.ac.id/id/eprint/11176This item is in the repository with the URL: http://digilib.unila.ac.id/id/eprint/111762015-07-14T04:14:44ZPEMBUATAN DAN KARAKTERISASI
MATERIAL RAMAH LINGKUNGAN BERBASIS PATI DENGAN PENAMBAHAN SURFAKTAN DAN KITOSAN MENGGUNAKAN EKSTRUDER ULIR TUNGGAL
Biodegradable plastics of the thermoplastic cassava starch (TPS) with polyethylene (PE) using a single screw extruder (SSE). Compatibilizer such as surfactant agent (Tween-80) and chitosan were added to improve compatibility between TPS and PE. The optimum thermal properties were characterized by using TGA. The result showed a number of films that degraded rose from 82.7% which have only single pattern degradation (pure LDPE) to 99.7% with three pieces of pattern degradation (TPS 20%) at temperature of 650 oC. Morphology characterization using SEM showed that Tween 80 and chitosan can improve the homogeneity of plastic gave a flat and more smooth surface. Dynamic Mechanical Analyzer thermograms showed a slight shift of Modulus Young properties from 365 MPa in pure LDPE to 158 MPa at TPS optimum concentration (20%). The value of pure LDPE viscosity was found to decrease from 55 MPA to 23 MPa. at TPS optimum concentration.
Key words : thermoplastic starch, polyethylene, Tween-80, Chitosan, Single
Screw Extruder (SSE)
Penelitian plastik biodegradable dari termoplastik pati singkong (TPS) yang ramah lingkungan dengan polietilen (PE) menggunakan ekstruder ulir tunggal (SSE). Untuk meningkatkan kompatibilitas antara campuran TPS dan PE ditambahkan bahan lain seperti surfaktan (Tween-80) dan kitosan sebagai compatibilizer. Karakterisasi termal optimum menggunakan TGA memperlihatkan jumlah film yang terdegradasi naik dari 82,7 % yang hanya memiliki 1 pola degradasi saja (LDPE murni) menjadi 99,7 % dengan 3 buah pola degradasi (TPS 20 %) pada suhu 650 oC. Untuk hasil morfologi menggunakan SEM menunjukan tween 80 dan kitosan dapat meningkatkan homogenitas plastik dengan mneghasilkan permukaan yang lebih halus dan rata. Untuk karakterisasi film dengan DMA memperlihatkan terjadinya penurunan sifat elastisitas dari 365 MPa pada LDPE murni menjadi 158 MPa pada konsentrasi TPS optimum (20 %). Untuk nilai viskositas LDPE murni terjadi penurunan yang cukup besar dari 55 MPA menjadi 23 MPa pada konsentrasi TPS optimum
Kata kunci : Pati Termoplastik, Polietilen. Tween-80, Kitosan, Ekstruder Ulir
Tunggal (SSE)1327011013 RAFFEL STEVANOraffel.phoa@gmail.com