PENGARUH HNO3DAN NaOH PADA ANALISIS Cr(III) MENGGUNAKAN ASAM TANAT SECARA SPEKTROFOTOMETRI ULTRAUNGU-TAMPAK

MARDIAN BAGUS SAPUTRA , 1117011031 (2016) PENGARUH HNO3DAN NaOH PADA ANALISIS Cr(III) MENGGUNAKAN ASAM TANAT SECARA SPEKTROFOTOMETRI ULTRAUNGU-TAMPAK. FAKULTAS MATEMATIKA DAN ILMU PENGETAHUAN ALAM , UNIVERSITAS LAMPUNG.

[img]
Preview
Text
ABSTRACT (ABSTRAK).pdf

Download (10Kb) | Preview
[img] Text
SKRIPSI FULL.pdf
Restricted to Registered users only

Download (1122Kb)
[img]
Preview
Text
SKRIPSI TANPA BAB PEMBAHASAN.pdf

Download (1006Kb) | Preview

Abstrak

Telah dilakukan penelitian pengaruh HNO3 dan NaOH pada analisis Cr(III) menggunakan asam tanat secara spektrofotometri Ultraungu-Tampak. Tujuan penelitian ini dilakukan perbandingan terhadap konsentrasi optimum pada pengaruh HNO3 dan NaOH, waktu kestabilan dan pengaruh ion-ion pengganggu. Hasil penelitian diperoleh konsentrasi optimum pada pengaruh HNO3 adalah 4 mM, waktu yang diperlukan untuk mencapai kestabilan adalah setelah menit ke 5, pada pengaruh NaOH terhadap kompleks Cr(III) dengan asam tanat konsentrasi optimum adalah 5 mM dan waktu mencapai kestabilan adalah setelah menit ke 20. Tidak terjadi gangguan pada konsentrasi ion Ni(II) ≥4 ppm, ion Mo(II) ≥4 ppm dan Ca(II) ≤10 ppm pada pengaruh HNO3. Pada pengaruh NaOH hasil yang didapatkan adalah Ni(II) <2 ppm, Mo(II) ≤10 ppm dan Ca(II) ≤10. Kata kunci : HNO3, NaOH, Cr(III), asam tanat, Spektrofotometer Ultraungu- Tampak. ABSTRACT This study was carried out to investigate HNO3 and NaOH effection of analysing Cr(III) using tannic acid with ultraviolet-visible spectrophotometry. The main purpose in this study is to compare the effect of concentrations of HNO3 and NaOH on the stability and the presence of interferring ions. The results showed the optimum concentration of HNO3 is 4 mM, resulted in 5 minutes duration of time to reach the stable complex, on the other hand the concentration of NaOH toward Cr(III) using tannic acid is 5 mM that was resulted in 20 minutes. No interfrence was observed in the presence of Ni(II) ≥4 ppm, Mo(II) ≥4 ppm and Ca(II) ≤10 ppm, with the use of HNO3. For NaOH, the same results were obtained for Ni(II) <2 ppm, Mo(II) ≤10 ppm and Ca(II) ≤10 ppm. Key word : HNO3, NaOH, Cr(III), tannic acid, Spectrophotometry.

Tipe Karya Ilmiah: Skripsi
Subyek:
> QD Chemistry
Program Studi: Fakultas MIPA > Prodi Kimia
Depositing User: 7339534 . Digilib
Date Deposited: 27 Jul 2016 03:14
Last Modified: 27 Jul 2016 03:14
URI: http://digilib.unila.ac.id/id/eprint/23164

Actions (login required)

View Item View Item